Store | Gadget

Cube pattern Pencil Case

$ 1.00

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

It’s a pencil case using the form that was created by the combination of projected cubes. It was made as a pencil case but is good to be used for various purposes to contain several things.

A number of projected cubes were gathered to form organic curves, which gives a simple form a new change. This digital pattern reminds us of armadillo’s solid outer skin or fish scale or ancient armors. Therefore, this digital pattern has rather a classical atmosphere.

It was designed to get a high quality result when printing it from a low-priced FDM 3D printer. It was to get a clean output without a postprocess. In order to print out numerous cubes easily, it is necessary to set a retraction in slicing software. However, printers with a weak retraction could produce things like spiderweb among cubes, which should be quit carefully with an office cutter.

It was made with a size: 110mm (width) x 110m (depth) x 93mm (height), which could be printed out with no adjustment of its size in most of desktop 3D printer.

Most of 3D printing data can be printed out freely by changing its size, but the reduction of this data could produce a problem of cube expression, which is recommended to be printed out as it is.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 2.6 MB
Recommend Print
Makerbot Replicator 2
Material Color
Ivory
White
Average Time
[0.2mm] 18h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !