Store | Gadget

Dabotap Pagoda

$ 2.44

Designer

Voxel Construction

Dabotap is a stone pagoda of Silla in Gyeongju Bulguksa. It is the national treasure #20, and located in line with Seokgatap in front of Bulguksa Daewoongjeon. Founded in 535(22 of Beopheungwang), it is estimated to be built together when Bulguksa was repaired by the rise of Kim Daesung in 751(10 of Gyeongdeokwang). Until 1925 that it was repaired during the Japanese occupation, the most of artifact was damaged. Dabotap is the tower of Daboyeoraesangjujeungmyeong, which actually is complete without a cintamani on the top of the tower, with 10.4meter of height. There was stone lion in 4 corners in the stylobate of this tower, but three of them were lost and one is under the angle rafter of Geukrakjeon.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 70.4 MB
Recommend Print
Ultimaker 3
Replicator 2
Material Color
Light Gray
White
Average Time
[0.2mm] 36h
[0.1mm] 126h 30m

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !