Store | Gadget

Seokgatap Pagoda

$ 2.44

Designer

Voxel Construction

Gyeongju Bulguksa Three-story Seokgatap is three pagoda of Silla in North South States Period, located in Gyeongju Bulguksa. Its original name was Seokgayeoraesangjuseolbeoptap, and often called Seokgatap. Named by the legend of Asadal and Asanyeo, it is often called Muyeongtap. In front of Bulguksa Daewoongjun, there is Dabotap in line, and it is designated as Korea’s national treasure #21.
This tower was generally estimated to be built in 751(10th years of Gyeongdeokwang) when Kim Daesung repaired Bulguksa, but there was rumor that it was completed in 742. Also, this tower was repaired in 1024 and 1038 because of earthquake occurred in the beginning of Goryeo. With its height of 10.4m, it is the most excellent example that represents Silla’s traditional stone pagoda style.


The peculiarity of this tower is that there is Palbanggeumganggwa that carved the lotus pattern in tower district that formed Jangbangseok around the tower and that there is natural stone supporting the stylobate of tower. This is almost unexampled, and of attention. When dissembling and repairing it, the sarira case and several reliquaries were discovered in a hole dug in the stereobate of the 2nd floor.


It is considered the representative work of the time, with a good harmony between the magnificence of 2nd floor stylobate and the beauty of tower.


When this output was completed, its size, depth and height was 250mm, 250mm, 350mm(including the base) respectively.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 23.7 MB
Recommend Print
Ultimaker 3
Replicator 2
Material Color
Light Gray
White
Average Time
[0.2mm] 32h
[0.1mm] 94h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !