Pieta Statue
FREE
You can download 1 free item per Free item - download ticket.
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
The work of Michelangelo Buonarroti in St. Peter's Basilica. In 1499, Pieta, who was 24 years old when Michelangelo commissioned Cardinal Languo Io, the French ambassador to the Pontiff, to create a statue to decorate his grave. Michelangelo was not paid well because the buyer died before the contract was completed.
In the composition of the sculpture, the Virgin Mary is in the form of a triangle holding her Jesus on her knees from the cross, he sculpted the Virgin Mary much larger than Jesus and made it unnatural. This is not surprising compared to previous Pietas, as compared to Peru's Pietas, drawn contemporaneously. Reflecting its natural appearance is rather unnatural, Michelangelo's talent, which has artificially created an unnatural appearance and made it appear natural, is a shining spot.
xyz - 260mm X 170mm X 250mm
https://www.myminifactory.com/object/pieta-in-st-peter-s-basilica-vatican-3796 / Bhushan Arekar for the original model and Reza Sedghi for the revisions.
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Hi - I would like to print this on my FDM, but after looking at the different sections, it would appear that several of them need supports. However, in the description it states that no supports are recommended or needed. This will be a fairly major project, so I just would like an understanding of what is required. Thank you
I'm looking at downloading this, but have a question regarding resolution. I have a Mars 3, and I'd love to not have all those layer lines that I see here. Is that possible?
Thanks!
Body part_2 reports missing layers, could you recommend another orientation please, thank you.
@d.mcmurdo3210
Could you share the screenshot of cura or prusa?
If you send us photos or pictures, we can give you more accurate guidance