It is suitable for any place that wants to produce a classical atmosphere (café, wine bar, library, living room and study). Especially it has a high decoration effect if it is hung together with the other head series.

It is data that needs no post-process without support. However it can be transformed nearly by contraction and it is recommended to print it out by using the less contracting materials (for example PLA) or by applying the suitable glue for the printer’s build plate.

For printing this statue out, it is not necessary to lower the layer thickness too much to obtain the smooth surface. In spite of the layer thickness, it gives a feeling of being a patterned marble or cut tree, and it is better to use the settings of which 3D printer of yours prints out best.

If the output is so heavy, it can be fallen down nearly from the wall, and if it falls down, you are concerned to be hurt so it is recommended to set infill low to 15~20% for the output weight to be lighter. And in case of printing it out with the other printer than that of FDM mode(for example, PLA, CJP, SLS etc.), the output can waste materials and be so heavy that is recommend to evacuate the inside by using a proper software.

The size of this product is 120mm (width) x 180mm (length) x 94mm (depth). However, having the bigger printer, you could print it out larger, and having the smaller printer, you could print it out by a proper reduction. Bright colors such as white or ivory color are easy to use, but it looks very nice by printing it out with a black color.