The first in world famous architecture series which is the Sydney Opera House in Australia. The Sydney Opera House is a concert hall in Sydney, New South Wales, Australia.
There are 1547 seats opera theater, 2679 seats music hall and lots of theaters, exhibitions, libraries etc. This building is one of the most famous and impressive 20th century architecture, and world famous concert hall.
The unique shape of roof is came from idea when danish architect Jørn Oberg Utzon who won in international design competition, was peeling off orange.
The Sydney Opera House was voted UNESCO World Heritage Site in 2007.
We realized the details that we have never seen before in 3D modeling for printing.
When assembled, it is displayed in alphabetical and numerical order so that it can be easily adjusted without confusion.
XYZ - 276 x 500 x 172mm
PRUSA Slicing Settings | Simplify 3D |
---|---|
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
Additions | Raft : OK / Brim : NO / Support : NO |
Ender Slicing Settings | Simplify 3D |
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
can I print this at 70-80% scale?
Sure! No problem! Thanks~