Store | Gadget

SD card holder - Toaster

$ 0.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

There are products that are not used often but are absolutely necessary. That is SD card. If you mix it with other small products, it is hard to find it, so it would be nice if you keep it separately.
This SD card holder has added fun to such applications. This product, which takes the form of a toaster, offers a little fun by putting an SD card in place of bread.

This product is divided into two parts, outside and inside. We made it so that it can be easily inserted after print. The outer part does not need support, but the inner part needs support.

It is also good as an interior accessory by collecting several pieces in various colors.

XYZ - 44 x 32 x 34mm

File
File 9.2 MB
Recommend Print
Cubicon Style
Ultimaker 3
Ultimaker 2+
Replicator 2
Material Color
All
Average Time
[0.2mm] 2h 45m
[0.1mm] 6h 30m
  • heesujang
    2017-04-28 09:51:41

    멋지네요!

    fab365
    2018-07-02 14:01:12

    좋은 말씀 감사합니다!

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !