Store | Gadget

Multi purpose chest - Refrigerator Mini

$ 1.44



GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

I have applied the refrigerator type multipurpose case that I made earlier to the shape of a small refrigerator.
There are many things on the desk that are not worthy of storage. For example, clips, staples, coins, small USB drives, and so on. These are small in size and are not noticeable when busy.
It would be nice if you had a unique, well-shaped storage box.

This product was designed using a very popular refrigerator shape to store it. This product is largely composed of three parts: outer body, door, inner structure.

Above all, the biggest feature is that the structure is designed so that the structure does not need to be assembled inside. This is also the biggest advantage of 3D printing.
When printing this internal structure, you should never apply support. When the support is applied, the parts are stuck and can not move. The only part of this data that needs support is the door. Please take special care.

It is very good as an interior accessory if you collect it by printing in various colors.

XYZ - 40 x 54 x 60mm

File 10.4 MB
Recommend Print
Ultimaker 3
Ultimaker 2+
Replicator 2
Material Color
Average Time
[0.2mm] 7h 30m
[0.1mm] 14h 30m

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !