FAB 365

닫기
Home < Tea Light candle holder Mini-Roll

Tea Light candle holder Mini-Roll

Tea light candle holder
$ 0.49
GOODesign
DESIGNER GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.
 
This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

We have already applied the shape of the paper or leather used in the candle holder to the tea light candlestick.
This design, of rolled paper or leather, produces a soft atmosphere by adding wit to a static product of candlestick. The repeatedly enclosed band upgrades such an atmosphere a little more, and delivers a modern feeling.

The materials used for FDM 3D printing (mainly PLA, ABS etc.) are melted over 200℃, which is strongly resistant to heat. Therefore, lighting a candle stands to be melted, and to be burnt or melted even though the candle is lighted. If the candle rolls down and becomes dirty, it can be cleanly eliminated by putting in a hot water.

It was designed with no support for printing out with a low-priced FDM 3D printer, and to obtain a clean output without a post-process.

XYZ - 70 x 63 x 26mm

RECOMMEND
PRINTER

  • Ultimaker 3
  • Ultimaker 2+
  • Replicator 2

MATERIAL
COLOR

  • All

AVERAGE
TIME

  • [0.1mm] 7h
  • [0.2mm] 3h 30m
TOTAL 1 FILES 2.6 MB
Notice!

Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted

    Notice!

    Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted