Name card or CF card Holder - TypewriterName card and CF card holder
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.
This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
This SD card holder has added fun to such applications. This product, which takes the form of a toaster, offers a little fun by putting an CF card or name card in place of paper.
This product does not simply make the SD card product bigger. We have differentiated by adding detail to suit the size.
The product is divided into two pieces, one on the outside and one on the inside, and is assembled after print.
The assembly method is to insert the inner piece by pushing it from the back of the outer piece. It can be a bit tight, so you have to put it in harder.
But after assembly, it is a bit loose. Therefore, the adhesive will stick to the bottom of the outer piece and be fixed in front of it.
The inner part does not require support, but the outer part requires support.
It is also good as an interior accessory by collecting several pieces in various colors.
XYZ - 84 x 84 x 60mm
- Ultimaker 3
- Ultimaker 2+
- Replicator 2
- [0.1mm] 24h 30m
- [0.2mm] 9h 20m
Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted