Blooming frame (Set)

$ 2.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

First set of candlestick design for 3D printing
It was designed for having a natural feeling by disposing in organic curve the mechanical pattern that rotates and intersects by grid. Especially, the form of overgrowing outward and forward makes us feel the life from inorganic substance as if the flower of machine blooms.

The materials used for FDM 3D printing(mainly PLA, ABS etc.)are melted over 200℃, which is strongly resistant to heat. Therefore, lighting a candle stands to be melted, and to be burnt or melted even though the candle is lighted. If the candle rolls down and becomes dirty, it can be cleanly eliminated by putting in a hot water.

It was designed with no support for printing out with a low-priced FDM 3D printer, and to obtain a clean output without a postprocess. However, it would be better use Raft or Brim for a stable printing-out. The candlestick with a size of 240mm and 170mm was divided for printing out in most of desktop printer that cannot print out a big one, and hexagonal ribs were created for its easy combination.

The plastic arts of candlestick can be used as an interior prop, and is good to use even in a formal evening or atmospheric meal at a special day or at times in a strict religious event. Its size is equal to width of 80mm, and its height is composed of 3(105mm, 170mm, 240mm), and putting all of three together helps more to the production of atmosphere.

The lower part of candlestick does not occupy too much space but has a width that does not fall down with some tilting. Specially, it has excellent form to use space as it can be mutually superimposed by the lower split part when putting several candlesticks of this series.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 7.1 MB
Recommend Print
Ultimaker 3
Ultimaker 2+
Makerbot Replicator 2
Material Color
White
Black
Average Time
[0.2mm] 20h 30m
[0.1mm] 53h 30m

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !