Makelight-B

$ 4.99

Designer

Cha-hee, Kim

Design Division / Team Leader / Lecturer Cha-hee, Kim / nick name : Gizmo T : 1544-1605 / F : 02-2624-0898 T : 02-2624-0899(direct) / M : 010-4724-2640 E : kchahee@naver.com By the Engineer, Of the Engineer, For the Engineer

Makelight is a lamp that changes the paradigm of existing lighting. The most important thing in interior design is light, and the thing that make light is lighting. Conventional lighting is a common consumer pattern that is left unattended after installation, and it can be changed according to the characteristics of the user by replacing the lampshade.

This product can be inserted into the IKEA SEKOND light.

xyz - 187 x 185 x 185mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 2.0 MB
Recommend Print
Cubicon Single
Ultimaker 2
Ultimaker 3
Material Color
Red
White
Average Time
0.1mm (34h)

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !