Multi purpose chest - Volkswagen T1 Camper Van

$ 3.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

It is a multi purpose chest with mini bus shape.
I removed the ceiling of the car so that anybody could put in various miscellaneous things and easily find things.

It is divided into the lower part of the body and the outside, and the outside is divided again into two for the expression of various colors.

One of the biggest advance of this design is that it can be output at once without assembling the axle of the wheel. This feature is one of the advantages of 3D printing, and it is specially designed to take advantage of this feature.

The lower part of this car does not need support but outside requires external support. However, since the design is designed so that the support is not needed as much as possible, there will be little traces left after removing the support.

I designed it as a jukebox, but it would be a good toy for young children.

Please take a look at the benefits of 3D printing that you do not have to assemble through this design.

Prusa Slicing settings
infill 10%, Outline Overlap 30%
Layer thickness 0.1 or 0.2mm, Retraction 2.4mm, nozzle 0.4mm, Print speed 2400mm/min, No support, No brim, Raft is OK, Recommend filament : PLA
First Layer Settings - First Layer Height : 150%, First Layer Width : 90%, First Layer Speed : 50%
Raft settings - Raft Top Layers : 2, Raft Base Layers : 1, Raft Offset from Part : 3~5mm, Separation Distance 0.1mm, Raft Top Infill 100%, Above Raft Speed : 30%

XYZ - 56 x 143 x 67mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 61.8 MB
Recommend Print
Replicator 2
Ultimaker 3
Ultimaker 2+
Material Color
All
Average Time
[0.1mm] 42h 30m
  • Steven Mathiasen
    2019-12-18 07:07:37

    VW T1 Bus 150% Scale.
    Printer: Prusa MK3s and Prusa SL1.
    Filament/resin: Spectrum filament and Wanhao water washable from www.3dstore.dk
    Print time: ~34Hours

    Awesome model ;)

    fab365
    2020-01-14 16:33:51

    Thank you for awesome print quality~ And thank you for sharing your settings and experiences.
    We think your prints are better than us.
    We hope you print more in the future.

    cndavies993085
    2021-02-25 05:59:53

    Incredible thought to do the details in resin, looks amazing!

  • chevysource
    2019-11-22 13:19:05

    Really love the model. The only issue I have is the area between the front headlamps and the point is really thin and has gaps and cracks. I have tried different setting and printed it 3 times and it comes out the same every time.

    fab365
    2020-01-14 18:22:26

    Thank you for your good print and advice.
    Especially, the color you chosen is great~
    We will consider your idea for the future.
    Thank you~

  • 4cpus4me
    2019-10-28 02:46:46

    Nice model. Prints easily and the fit of the parts was excellent, only required some sanding of the hexagon areas of the axles to get the wheels to snap on. I just hot-glued the red body panel on because I was in a hurry and nothing really holds it in place.

    fab365
    2019-11-07 22:32:29

    I was surprised that your printing was so clean.
    But it's too bad that the glue spilled. It would be nice to print it out again.
    We look forward to your many printing photos and reviews.
    Thank you very much~

  • numanerdogan
    2019-07-10 06:09:50

    what type of file are you sharing? stl or sldprt?

    fab365
    2019-07-10 11:34:22

    We sell STL files.

  • intelli
    2019-03-09 18:33:02

    Hey I love the design and I bought to to print for my daughter.
    Can you share your print settings for this on a MK3 with slic3er PE?
    Very much appreciated!

    fab365
    2019-03-09 22:55:21

    Thank you! We put slice settings on information(above explanation) Happy 3D printing!

  • Daveb
    2018-04-06 04:59:37

    How well would the scale up?

    fab365
    2018-04-06 11:19:15

    Depending on the size of the 3D printer, it does not matter if the size is printed large. Small prints, however, can cause problems. We succeeded in making it as small as 70%.

  • mintyglass
    2017-10-18 13:53:26

    great design. The parts fit well into each other.
    I printed in one color, but would look so much better in multiple colors as shown in the picture.
    Fine details are superb!

    fab365
    2017-10-18 14:12:43

    Thank you!
    Try it in various colors later!

  • MrFairbanks
    2017-10-02 05:55:51

    This is really cool. I wonder how well the parts would hold up if printed at, say, 50%.

    fab365
    2017-10-04 16:02:18

    There is no problem up to 50% size. However, as the size becomes smaller, the wall thickness of the automobile becomes thinner and it does not work.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted