Villa Savoye

$ 9.99

Designer

Voxel Construction

Villa Savoye (French pronunciation: ​[sa.vwa]) is a modernist villa in Poissy, on the outskirts of Paris, France. It was designed by Swiss architects Le Corbusier and his cousin, Pierre Jeanneret, and built between 1928 and 1931 using reinforced concrete. A manifesto of Le Corbusier's "five points" of new architecture, the villa is representative of the bases of modern architecture, and is one of the most easily recognizable and renowned examples of the International style.
In July 2016, the house and several other works by Le Corbusier were inscribed as UNESCO World Heritage Sites.

This building, which consists of three floors, is divided into individual floors so that the inside of the building can be fully appreciated.
I have divided it into several parts to describe the details of this building. Therefore, the printing takes a long time. To print the window frame, a glossy build plate installed 3D printer is recommended.
It is also divided by color, so if you print it, you will appreciate the value of this building.

Lengh-243 X Width-278 X Height-118mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 8.9 MB
Recommend Print
Cubicon Single
Ultimaker 3
Ultimaker 2+
Material Color
Black
Brown
Green
Grey
White
Average Time
[0.1mm] 296h
  • aersingirgin Creality Ender-3 ProCura
    2021-01-25 20:04:21

    Grate design and lovely details. Is it a scaled model?

  • ivanv
    2019-07-18 08:46:20

    en que escala está la impresion?

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !