Fantastic at 150%

conanlloyd
1 4

I printed this as 150% and .12 layer height using Printed Solid's Jessie Army Green. I sliced the Jeep body and the accessories at the same time on a raft to keep anything from failing. Came out perfectly!

I did break the driver's seat back when assembling due to holding it wrong, but a quick application of 3D Gloop fixed that.

Body printing timelapse: https://youtu.be/99jxGjDdUfo

Wheels printing timelapse: https://youtu.be/xIL_RKP5McE

Sliced in Cura 4.7.1 with the following settings:
Layer Height: .12
Bed temp: 60
Nozzle temp: 210
Raft: Yes
Supports: No
Infill: 5%
Infill pattern: Grid

Tell your friends!
Go to list

Comments 4

  • fab365
    2020-09-25

    Wow~
    I recommend using Raft, but many people are reluctant to use Raft. However, Raft is a good option for reliable printing when used well. High quality printing with your raft will be a good example for many.
    Thank you for sharing time-lapse too.

  • conanlloyd
    2020-09-24

    Wheels printing timelapse: https://youtu.be/xIL_RKP5McE

  • conanlloyd
    2020-09-24

    Body printing timelapse: https://youtu.be/99jxGjDdUfo

    fab365
    2020-09-25

    Thanks for your time-lapse~