Hey.
Anybody can fix this?
I think its wrong.
Its in body file. Cant pull this arm apart.
Problem
2022-09-28
Forgot Password
Please enter your email address below.
We'll send you an email with your username,
and a link to reset your password.
I thought there was no issue with this model, so I printed it with different settings and different pla, as you can see always the same issue one arm too loose, other arm stuck and the problem described by original poster.
We fixed this part.
We checked with Cura slicer.
Please download again and print.
Thank you for your information.
We fixed this part.
We checked with Prusa slicer.
Please download again and print.
Thank you for your information.
Had the same issue should have checked this thread printed it 3 times with different settings and filament..
Yes, I also had a problem with it, you can divide it in PrusaSlicer and print it separately as shown in the picture
Same issue over here, two times same error.
No problems were found when we checked. However, there may be problems that we are not aware of, so we converted the data in a different way and uploaded it, so please download it again.
Thank you~
Please enjoy~
Hi, new upload worked much better, unfortunately though the model was mirrored so the left hand chest piece doesn't have a round button..
Yes it seems they just mirrored the part.
Hi,
Can you upload a new version with correct body, (not mirrored) and fix my issue with the arms?
Made a new part for the button to fit the mirrored part. The green piece covers it anyway. I just made a copy from the led piece, mirrored it, removed the led elements and combined it with the button. Printing it at 200%.
We fixed this part.
We checked with Prusa slicer.
Please download again and print.
Thank you for your information.
We fixed this part.
We checked with Cura slicer.
Please download again and print.
Thank you for your information.